توضیحات

Description

The single channel Switch/Proximity Detector Repeater, D5030S module, is a unit suitable for applications requiring SIL 3 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high risk industries.
The unit can be configured for switch or proximity detector (EN60947-5-6, NAMUR), NO or NC and for NE or ND SPST (D5030D) or SPDT (D5030S) relay output contact. Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area.
Fault detection circuit (DIP switch configurable) is available for both proximity sensor and switch equipped with end of line resistors. In case of fault, when enabled it de-energizes the corresponding output relay and turns the fault LED on; when disabled the corresponding output relay repeats the input line open or closed status as configured.

Mounting on standard DIN-Rail, with or without Power Bus, in Safe Area / Non Hazardous Location or in Zone 2 / Class I, Division 2 or Class I, Zone 2.

Features

• Systematic capability SIL 3
  • Input from Zone 0 (Zone 20) / Division 1, installation in Zone 2 / Division 2.
  • NO/NC switch/proximity Detector Input, NE/ND relay actuation mode.
  • Field open and short circuit detection.
  • Three port isolation, Input/Output/Supply.
  • EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
  • In-field programmability by DIP Switch.
  • High Density, two channels per unit.
  • Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus.
  • 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

Supply

18-30 Vdc

Channels

1 (2 channels: D5030D)

SIL level

SIL 3

Series

D5000

Supply

24 Vdc nom (18 to 30 Vdc), reverse polarity protected.

Current consumption: 35 mA (D5030D), 18 mA (D5030S), @ 24 Vdc with

short circuit input and relay energized, typical.

Power dissipation: 0.85 W (D5030D), 0.45 W (D5030S), @ 24 Vdc with

short circuit input and relay energized, typical.

Input

Input switching current levels: ON ≥ 2.1 mA, OFF ≤ 1.2 mA.

Fault current levels: open fault ≤ 0.2 mA, short fault ≥ 6.8 mA.

Input equivalent source: 8 V 1 kΩ typical (8 V no load, 8 mA short).

Output

Voltage free SPST (D5030D) or SPDT (D5030S) relay contact.

Contact material: Ag Alloy (Cd free), gold plated.

Contact rating: 4 A 250 Vac 1000 VA, 4 A 250 Vdc 120 W (resistive load).

Contact min. switching current: 1 mA.

DC and AC load breaking capacity: refer to Instruction Manual.

Mechanical / electrical life: 5 * 10⁶ / 3 * 10⁴ operation, typical.

Operate / release time: 8 / 4 ms, typical.

Frequency response: 10 Hz maximum.

Isolation

I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/ I.S In 500 V; Out/Supply 2.5

kV; Out/Out 2.5 kV.

Environmental conditions

Operating temperature: temperature limits –40 to +70 °C.

Storage temperature: temperature limits –45 to +80 °C.

Safety description

Associated apparatus and non-sparking electrical equipment.

Uo = 10.5 V, Io = 22 mA, Po = 56 mW at terminals 7-8, 9-10.

Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.

Mounting

DIN-Rail 35 mm, with or without Power Bus.

Weight: about 140 g (D5030D), 120 g (D5030S).

Connection: by polarized plug-in disconnect screw terminal blocks to

accommodate terminations up to 2.5 mm² (13 AWG).

Dimensions: Width 12.5 mm, Depth 123 mm, Height 120 mm.